Semin 2 in 1 adhesive/joint coating
Multi-purpose coating
Bonding-finishing; coating-smoothing
ADVANTAGES
- Multi-purpose
- Multi-purpose adhesive
- Nice finish
DESCRIPTION
A ready-to-use compound especially formulated for jointing tapered plasterboards using joint tape The coating is mixed-use: it is suitable for both bonding and finishing the joint tape. 1 product: 2 functions
Bonding and finishing of the tape
Coating and smoothing of plasterboard.
A ready-to-use compound especially formulated for jointing tapered plasterboards using joint tape The coating is mixed-use: it is suitable for both bonding and finishing the joint tape. 1 product: 2 functions
Bonding and finishing of the tape
Coating and smoothing of plasterboard.
COMPOSITION
Resin, water, calcium carbonate, preservative, and various additives.
The resulting compound is white in colour.
Resin, water, calcium carbonate, preservative, and various additives.
The resulting compound is white in colour.
SUITABLE SUBSTRATES
All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with tapered edges and cardboard surfaces.
All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with tapered edges and cardboard surfaces.
STORAGE
9 months in unopened original packaging, protected from frost and high temperatures.
Keep away from children.
9 months in unopened original packaging, protected from frost and high temperatures.
Keep away from children.
SUBSTRATE PREPARATION
The board cut-outs must be bevelled and dust-free.
The board cut-outs must be bevelled and dust-free.
USE
The application is done manually by "buttering" the tapered area with a 1 or 15 cm long coating knife and placing the tape.
In the case of vertical protruding corners, use a reinforced strip (reinforcement on the panel side). Apply a ceiling angle tape, ensuring that the concrete is free of any traces of formwork oil.
The surface must be dry, and free of dust and loose material.
The application is done manually by "buttering" the tapered area with a 1 or 15 cm long coating knife and placing the tape.
In the case of vertical protruding corners, use a reinforced strip (reinforcement on the panel side). Apply a ceiling angle tape, ensuring that the concrete is free of any traces of formwork oil.
The surface must be dry, and free of dust and loose material.
APPLICATION TIP
To save time, don't forget to prepare joint tapes cut to the right length.
To save time, don't forget to prepare joint tapes cut to the right length.
DRYING TIME
Repeat application can be done 24 hours after the first pass.
Repeat application can be done 24 hours after the first pass.
CONSUMPTION
Approx. 500g/m² of board
Approx. 500g/m² of board
Semin on
social media
