COLLE PUISSANCE 3
Quick-drying gypsum block adhesive coating
Quick drying
ADVANTAGES
- Quick drying
- Nice finish
DESCRIPTION
This multi-purpose powder adhesive is especially formulated for the installation of gypsum block partitions.
This multi-purpose powder adhesive is especially formulated for the installation of gypsum block partitions.
PACKAGING
25 kg bags on a covered pallet.5 kg bags
25 kg bags on a covered pallet.5 kg bags
COMPOSITION
Gypsum, calcium carbonate, resin, and various additives. The compound is white in colour
Gypsum, calcium carbonate, resin, and various additives. The compound is white in colour
SUITABLE SUBSTRATES
Waterproofed or non-waterproofed gypsum blocks Can also be used as a finishing coating on most substrates (plaster, concrete, agglomerates, cellular concrete, etc.)
Waterproofed or non-waterproofed gypsum blocks Can also be used as a finishing coating on most substrates (plaster, concrete, agglomerates, cellular concrete, etc.)
STORAGE
9 months in unopened original packaging, protected from humidity.
9 months in unopened original packaging, protected from humidity.
SUBSTRATE PREPARATION
The gypsum blocks must be dry and dust-free.
The gypsum blocks must be dry and dust-free.
MIXING RATIO
Approx. 13-14 litres of water per 25 kg bag
Approx. 13-14 litres of water per 25 kg bag
USE
The first row is laid by bonding together the edge and bottom of the mortises which come from the floor and in the vertical part. The joints between blocks must not exceed 3 mm in thickness.The second row should be laid in the same way, with staggered joints, before the adhesive has begun to set. This is important so that the wall is well aligned. Allow to dry before starting the third row.
The first row is laid by bonding together the edge and bottom of the mortises which come from the floor and in the vertical part. The joints between blocks must not exceed 3 mm in thickness.The second row should be laid in the same way, with staggered joints, before the adhesive has begun to set. This is important so that the wall is well aligned. Allow to dry before starting the third row.
APPLICATION TIP
If you are planning to lay tiles on a gypsum wall, avoid applying a gypsum-based film coating to the wall
If you are planning to lay tiles on a gypsum wall, avoid applying a gypsum-based film coating to the wall
DRYING TIME
3 to 4 hours depending on ambient conditions
3 to 4 hours depending on ambient conditions
CONSUMPTION
Depends on the thickness of the blocks:For 5 cm thick blocks, the consumption is 1 kg|m².For 1 cm thick blocks, the consumption is 2 kg|m².
Depends on the thickness of the blocks:For 5 cm thick blocks, the consumption is 1 kg|m².For 1 cm thick blocks, the consumption is 2 kg|m².
AVAILABLE DOCUMENTATION
DTU 25.31NF EN 1286
DTU 25.31NF EN 1286
Follow us 
