Sem-Wood Ready to use surface
WOOD FILLER PASTE
FILLER INTERIOR-EXTERIOR
ADVANTAGES
- Little shrinkage
- Very high-quality finish
- Easy to sand
DESCRIPTION
Surface filler for treating small holes and cracks in wood.
Surface filler for treating small holes and cracks in wood.
COMPOSITION
Water, mineral filler, emulsion resin, dispersant and various additives. The paste is beige.
Water, mineral filler, emulsion resin, dispersant and various additives. The paste is beige.
DIMENSION_POSSIBLE
Pot 1 kg
Tube 300 gr
Pot 1 kg
Tube 300 gr
USE :
The temperature on application and during drying must be between +5°C and +35°C.
Do not apply at humidity levels of above 80%.
Do not apply to damp substrates.
WOOD FILLER must be covered.
On untreated wood, apply a primer beforehand.
The temperature on application and during drying must be between +5°C and +35°C.
Do not apply at humidity levels of above 80%.
Do not apply to damp substrates.
WOOD FILLER must be covered.
On untreated wood, apply a primer beforehand.
SUITABLE SUBSTRATES
All types of paint, varnish and wood stain. Substrates must comply with DTUs, i.e. be clean, dry, hard, cohesive, healthy, dust-free and free of any trace of formwork oil.
All types of paint, varnish and wood stain. Substrates must comply with DTUs, i.e. be clean, dry, hard, cohesive, healthy, dust-free and free of any trace of formwork oil.
STORAGE
12 months in the original, unopened packaging, protected from frost and high temperatures.
12 months in the original, unopened packaging, protected from frost and high temperatures.
USE
APPLICATION THICKNESS : Max 10 mm.
Applied by hand using a filling knife or spatula.
Clean tools with a dry cloth or with water if necessary
TECHNICAL CHARACTERISTICS Second application : 12-24 hours, depending on the work / Drying time before painting: 48 hours (after complete drying). / Adhesion: >0.8 MPa in accordance with EN 16566
APPLICATION THICKNESS : Max 10 mm.
Applied by hand using a filling knife or spatula.
Clean tools with a dry cloth or with water if necessary
TECHNICAL CHARACTERISTICS Second application : 12-24 hours, depending on the work / Drying time before painting: 48 hours (after complete drying). / Adhesion: >0.8 MPa in accordance with EN 16566
DRYING TIME
This depends on the ambient conditions, the type of substrate and the thickness of application.
A second coat, 1 mm thick, can be applied 12 hours after the first coat under normal conditions.
This depends on the ambient conditions, the type of substrate and the thickness of application.
A second coat, 1 mm thick, can be applied 12 hours after the first coat under normal conditions.
COVERING
All types of paint, varnish and wood stain.
All types of paint, varnish and wood stain.
AVAILABLE DOCUMENTATION
DTU 59.1: Building painting work
EN 16566: paint plasters for interior work
DTU 59.1: Building painting work
EN 16566: paint plasters for interior work
Semin on
social media
