KEDOLITH
Repair coating
Interior - exterior use
ADVANTAGES
- Restoration of damaged concrete
- Excellent adhesion
DESCRIPTION
KEDOLITH is ideal for a wide range of interior and exterior works: filling, repairing, sealing, coating.
KEDOLITH is ideal for a wide range of interior and exterior works: filling, repairing, sealing, coating.
PACKAGING
5 and 15 kg bags on a covered pallet
5 and 15 kg bags on a covered pallet
COMPOSITION
Cement-based coating, with sand, resin and various additives | The resulting compound is grey in colour.
Cement-based coating, with sand, resin and various additives | The resulting compound is grey in colour.
SUITABLE SUBSTRATES
All types of clean, sound, dry, dust-free, and oil-free substrates: masonry, concrete, cement coating.
All types of clean, sound, dry, dust-free, and oil-free substrates: masonry, concrete, cement coating.
STORAGE
6 months in unopened original packaging, protected from humidity.
6 months in unopened original packaging, protected from humidity.
SUBSTRATE PREPARATION
They must be clean, dry, dust-free, and free of all traces of formwork oil. |It is imperative that the substrates have a good structure. If this is not the case, harden the base with PRIM-SM.
They must be clean, dry, dust-free, and free of all traces of formwork oil. |It is imperative that the substrates have a good structure. If this is not the case, harden the base with PRIM-SM.
MIXING RATIO
Approximately 1.5 litres of water per 5 kg bag (or 4.5 litres for 15 kg)
Approximately 1.5 litres of water per 5 kg bag (or 4.5 litres for 15 kg)
USE
Up to 2 cm in one pass.
Up to 2 cm in one pass.
APPLICATION TIP
To apply KEDOLITH in a thick layer, add about 2% of sand with a grain size of -2 mm
To apply KEDOLITH in a thick layer, add about 2% of sand with a grain size of -2 mm
DRYING TIME
The drying time depends on the ambient conditions, the nature of the substrate, and the thickness of the application. As a general rule, at a thickness of 1 cm, KEDOLITH dries in 12 hours.
The drying time depends on the ambient conditions, the nature of the substrate, and the thickness of the application. As a general rule, at a thickness of 1 cm, KEDOLITH dries in 12 hours.
CONSUMPTION
Approx. 1.3 kg|m²|mm thickness.
Approx. 1.3 kg|m²|mm thickness.
AVAILABLE DOCUMENTATION
DTU 42.1 | AFNOR CLASSIFICATION NFT 36.5 FAMILY IV - CLASS 4 B
DTU 42.1 | AFNOR CLASSIFICATION NFT 36.5 FAMILY IV - CLASS 4 B
Follow us 
