BONDING TERRACOTTA ADHESIVE
Adhesive for terracotta blocks
Dry rooms
ADVANTAGES
- Fast setting
- Excellent adhesion
- Cebtp certification
DESCRIPTION
BONDING TERRACOTTA ADHESIVE is the ideal solution for the installation of terracotta block partitions in dry areas. At the same time, it can be used as a filler to fill gaps at the top of the partions.
BONDING TERRACOTTA ADHESIVE is the ideal solution for the installation of terracotta block partitions in dry areas. At the same time, it can be used as a filler to fill gaps at the top of the partions.
PACKAGING
25 kg bags on a covered pallet.
25 kg bags on a covered pallet.
COMPOSITION
Gypsum, calcium carbonate, resin, and various additives. The compound is white in colour
Gypsum, calcium carbonate, resin, and various additives. The compound is white in colour
SUITABLE SUBSTRATES
Terracotta blocks
Terracotta blocks
STORAGE
9 months in unopened original packaging, protected from humidity.
9 months in unopened original packaging, protected from humidity.
SUBSTRATE PREPARATION
Terracotta blocks must be dry and dust-free.Floors for the first rows of the partitions must also be dust-free.
Terracotta blocks must be dry and dust-free.Floors for the first rows of the partitions must also be dust-free.
MIXING RATIO
Approx. 12-13 litres of water per 25 kg bag
Approx. 12-13 litres of water per 25 kg bag
USE
The application is done by coating the edges of the blocks with the adhesive. The joints should be approximately 2 mm thick.The blocks are then laid with staggered joints.The gap between the last row of blocks and the ceiling should be as small as possible (maximum 3 mm).At the top, secure the partition with LIANT COLLE TERRE CUITE.
The application is done by coating the edges of the blocks with the adhesive. The joints should be approximately 2 mm thick.The blocks are then laid with staggered joints.The gap between the last row of blocks and the ceiling should be as small as possible (maximum 3 mm).At the top, secure the partition with LIANT COLLE TERRE CUITE.
APPLICATION TIP
If the gap at the upper block near the ceiling is very thick, mix the BONDING TERRACOTTA ADHESIVE with 5% plaster.
If the gap at the upper block near the ceiling is very thick, mix the BONDING TERRACOTTA ADHESIVE with 5% plaster.
DRYING TIME
4 to 5 hours depending on ambient conditions.
4 to 5 hours depending on ambient conditions.
CONSUMPTION
It depends on the thickness of the blocks, and varies between 1.5 kg|m² (5 cm) and 3 kg|m² (1 cm)
It depends on the thickness of the blocks, and varies between 1.5 kg|m² (5 cm) and 3 kg|m² (1 cm)
AVAILABLE DOCUMENTATION
PV CEBTP N° B 252-7-385|2CSTB technical notice N°9|14 |982
PV CEBTP N° B 252-7-385|2CSTB technical notice N°9|14 |982
Follow us 
