BONDING ADHESIVE EXTRA
Bonding adhesive
For gypsum blocks
ADVANTAGES
- Good adhesion
- Reduced setting time
DESCRIPTION
This powder adhesive is especially formulated for the assembly of gypsum block partitions. At the same time, it can be used as a filler to fill gaps at the top of the partions.
This powder adhesive is especially formulated for the assembly of gypsum block partitions. At the same time, it can be used as a filler to fill gaps at the top of the partions.
PACKAGING
25 kg bags on a covered pallet.
25 kg bags on a covered pallet.
COMPOSITION
Gypsum, calcium carbonate, resin, and various additives. The compound is white in colour
Gypsum, calcium carbonate, resin, and various additives. The compound is white in colour
SUITABLE SUBSTRATES
Waterproof or non-waterproof gypsum blocks
Waterproof or non-waterproof gypsum blocks
STORAGE
9 months in unopened original packaging, protected from humidity.
9 months in unopened original packaging, protected from humidity.
SUBSTRATE PREPARATION
The gypsum blocks must be dry and dust-free.
The gypsum blocks must be dry and dust-free.
MIXING RATIO
Approx. 13-14 litres of water per 25 kg bag
Approx. 13-14 litres of water per 25 kg bag
USE
The first row is laid by bonding the edge and bottom of the mortises which come on the floor and in vertical part.<|p>.The joints between blocks must not exceed 3 mm in thickness.The second row should be done in the same way, with staggered joints, before the adhesive has begun to set.This is important so that the wall is well aligned. Allow to dry before starting the third row.
The first row is laid by bonding the edge and bottom of the mortises which come on the floor and in vertical part.<|p>.The joints between blocks must not exceed 3 mm in thickness.The second row should be done in the same way, with staggered joints, before the adhesive has begun to set.This is important so that the wall is well aligned. Allow to dry before starting the third row.
DRYING TIME
5 to 6 hours depending on ambient conditions.
5 to 6 hours depending on ambient conditions.
CONSUMPTION
It depends on the thickness of the blocks:For 5 cm thick blocks, the consumption is 1 kg|m².For 1 cm thick blocks, the consumption is 2 kg|m².
It depends on the thickness of the blocks:For 5 cm thick blocks, the consumption is 1 kg|m².For 1 cm thick blocks, the consumption is 2 kg|m².
AVAILABLE DOCUMENTATION
DTU 25.31NF EN 1286
DTU 25.31NF EN 1286
Follow us 
