COLLE PUISSANCE 4
Multi-purpose powder adhesive
For waterproof partitions
ADVANTAGES
- Especially made for bathrooms
- Multi-purpose adhesive
- Improved water resistance
DESCRIPTION
Multi-purpose adhesive especially formulated for waterproof partitioning, gypsum block adhesive, waterproof plasterboard joints, waterproof filling and smoothing
Multi-purpose adhesive especially formulated for waterproof partitioning, gypsum block adhesive, waterproof plasterboard joints, waterproof filling and smoothing
PACKAGING
25 kg bags on a covered pallet.
25 kg bags on a covered pallet.
COMPOSITION
Gypsum-based powder coating, calcium carbonate, and various additives. The resulting compound is green in colour.
Gypsum-based powder coating, calcium carbonate, and various additives. The resulting compound is green in colour.
SUITABLE SUBSTRATES
Waterproof gypsum blocks, waterproof plasterboards
Waterproof gypsum blocks, waterproof plasterboards
STORAGE
9 months in unopened original packaging, protected from moisture | Keep away from children.|If swallowed, seek medical advice immediately and show the packaging.
9 months in unopened original packaging, protected from moisture | Keep away from children.|If swallowed, seek medical advice immediately and show the packaging.
SUBSTRATE PREPARATION
The waterproof gypsum blocks and plasterboards must be dry and dust-free.
The waterproof gypsum blocks and plasterboards must be dry and dust-free.
MIXING RATIO
Approx. 13-14 litres of water per 25 kg bag
Approx. 13-14 litres of water per 25 kg bag
USE
Application on gypsum blocks:The first row is laid by bonding the edge and bottom of the mortises which come from the floor and in the vertical part.The joints between blocks must not exceed 3 mm in thickness. the second row should be laid in the same way, with staggered joints, before the adhesive has begun to set. This is important so the wall is well aligned.Allow to dry before starting the third row.Application to plasterboard joints :Before dealing with the joints themselves, the joints between accidentally non-joining panels must be filled in and various repairs carried outThe application is done manually by "buttering" the tapered area with a 1 or 15 cm coating knife and placing the tape (ground side against the coating).Then make a finishing pass, let dry and finish to mask the tape. Also mask the screw heads.
Application on gypsum blocks:The first row is laid by bonding the edge and bottom of the mortises which come from the floor and in the vertical part.The joints between blocks must not exceed 3 mm in thickness. the second row should be laid in the same way, with staggered joints, before the adhesive has begun to set. This is important so the wall is well aligned.Allow to dry before starting the third row.Application to plasterboard joints :Before dealing with the joints themselves, the joints between accidentally non-joining panels must be filled in and various repairs carried outThe application is done manually by "buttering" the tapered area with a 1 or 15 cm coating knife and placing the tape (ground side against the coating).Then make a finishing pass, let dry and finish to mask the tape. Also mask the screw heads.
APPLICATION TIP
If you are planning to lay tiles on a gypsum wall, avoid applying a gypsum-based film coating to the wall
If you are planning to lay tiles on a gypsum wall, avoid applying a gypsum-based film coating to the wall
DRYING TIME
For waterproof gypsum blocks: 5 to 6 hours.For waterproof plasterboards: the repeat coat can be applied 4 to 5 hours after the first coat.
For waterproof gypsum blocks: 5 to 6 hours.For waterproof plasterboards: the repeat coat can be applied 4 to 5 hours after the first coat.
CONSUMPTION
For waterproof gypsum blocks, the consumption is 1 kg|m².For waterproof plasterboards, 35 g|m².
For waterproof gypsum blocks, the consumption is 1 kg|m².For waterproof plasterboards, 35 g|m².
AVAILABLE DOCUMENTATION
For gypsum blocks :DTU 25.31NF EN 1286Pour plaques de plâtre :DTU 25.41 and 25.42NF EN 13963
For gypsum blocks :DTU 25.31NF EN 1286Pour plaques de plâtre :DTU 25.41 and 25.42NF EN 13963
Follow us 
