Hinged hanger
Link between the wooden structure and the gridwork.
Hinged suspension accessory for plasterboard ceilings under wooden floors.
ADVANTAGES
- Conventional and quick installation
- The movable "l" rotates so that the threaded rod is vertical
DESCRIPTION
2-part hanging accessory in 125|1 galvanised steel: an OMEGA bracket + a special angle bracket. Includes two M6 threaded holes with a pitch of 100. Link between the wooden structure and the gridwork. Hinged suspension accessory for plasterboard ceilings under wooden floors.
2-part hanging accessory in 125|1 galvanised steel: an OMEGA bracket + a special angle bracket. Includes two M6 threaded holes with a pitch of 100. Link between the wooden structure and the gridwork. Hinged suspension accessory for plasterboard ceilings under wooden floors.
TECHNICAL CHARACTERISTICS
- Reaction to fire: A1
- POIDS: 0,015
COMPOSITION
Galvanised steel
Galvanised steel
APPLICATION TIP
1.Fixed to the rafter by SEMIN screws of a minimum of 25 mm, the SEMIN threaded rod of 6 mm diameter positioned in the mobile "L" is vertical and secured by the nut.
2. Screw the pivot bracket onto the threaded rod.
3. Clip the pivot bracket onto the furring strip.
CAUTION: Spaces between hangers must comply with DTU 25-41.
1.Fixed to the rafter by SEMIN screws of a minimum of 25 mm, the SEMIN threaded rod of 6 mm diameter positioned in the mobile "L" is vertical and secured by the nut.
2. Screw the pivot bracket onto the threaded rod.
3. Clip the pivot bracket onto the furring strip.
CAUTION: Spaces between hangers must comply with DTU 25-41.
CONSUMPTION
1,8/m²
0,6/ml
1,8/m²
0,6/ml
AVAILABLE DOCUMENTATION
Regulation : EN 13964
In compliance with DTU 25.41
Regulation : EN 13964
In compliance with DTU 25.41
Follow us 
